.
Torus knot
In knot theory, a torus knot is a special kind of knot that lies on the surface of an unknotted torus in R3. Similarly, a torus link is a link which lies on the surface of a torus in the same way. Each torus knot is specified by a pair of coprime integers p and q. A torus link arises if p and q are not coprime (in which case the number of components is lcm(p, q)). A torus knot is trivial if and only if either p or q is equal to 1 or −1. The simplest nontrivial example is the (2,3)-torus knot, also known as the trefoil knot.
the (2,−3)-torus knot, also known as the left-handed trefoil knot
Geometrical representation
A torus knot can be rendered geometrically in multiple ways which are topologically equivalent (see Properties below) but geometrically distinct. The convention used in this article and its figures is the following.
The (p,q)-torus knot winds q times around a circle in the interior of the torus, and p times around its axis of rotational symmetry. If p and q are not relatively prime, then we have a torus link with more than one component.
The direction in which the strands of the knot wrap around the torus is also subject to differing conventions. The most common is to have the strands form a right-handed screw for p q > 0.[1][2][3]
The (p,q)-torus knot can be given by the parametrization
\( x = r \cos(p\phi) \)
\( y = r \sin(p\phi) \)
\( z = -\sin(q\phi) \)
where \( r = \cos(q\phi)+2 and 0<\phi<2\pi \). This lies on the surface of the torus given by \( (r-2)^2 + z^2 = 1 \)(in cylindrical coordinates).
Other parametrizations are also possible, because knots are defined up to continuous deformation. The illustrations for the (2,3)- and (3,8)-torus knots can be obtained by taking \( r = \cos(q\phi)+4 \), and in the case of the (2,3)-torus knot by furthermore subtracting respectively \( 3\cos((p-q)\phi) \)and \( 3\sin((p-q)\phi) \) from the above parametrizations of x and y. The latter generalizes smoothly to any coprime p,q satisfying p<q<2p.
Properties
Diagram of a (3,−8)-torus knot.
A torus knot is trivial iff either p or q is equal to 1 or −1.[2][3]
Each torus knot is prime and chiral.
The (p,q) torus knot is equivalent to the (q,p) torus knot.[1][3] This can be proved by moving the strands on the surface of the torus, which is nicely illustrated here. The (p,−q) torus knot is the obverse (mirror image) of the (p,q) torus knot.[3] The (−p,−q) torus knot is equivalent to the (p,q) torus knot except for the reversed orientation.
The (3, 4) torus knot on the unwrapped torus surface, and its braid word
Any (p,q)-torus knot can be made from a closed braid with p strands. The appropriate braid word is [4]
\( (\sigma_1\sigma_2\cdots\sigma_{p-1})^q. \)
(Please note that this formula assumes the common convention that braid generators are right twists,[2][4][5][6] which is not followed by the Wikipedia page on braids.)
The crossing number of a (p,q) torus knot with p,q > 0 is given by
\( c = min((p−1)q, (q−1)p). \)
The genus of a torus knot with p,q > 0 is
\( g = \frac{1}{2}(p-1)(q-1). \)
The Alexander polynomial of a torus knot is [1][4]
\( \frac{(t^{pq}-1)(t-1)}{(t^p-1)(t^q-1)}. \)
The Jones polynomial of a (right-handed) torus knot is given by
\( t^{(p-1)(q-1)/2}\frac{1-t^{p+1}-t^{q+1}+t^{p+q}}{1-t^2}. \)
The complement of a torus knot in the 3-sphere is a Seifert-fibered manifold, fibred over the disc with two singular fibres.
Let Y be the p-fold dunce cap with a disk removed from the interior, Z be the q-fold dunce cap with a disk removed its interior, and X be the quotient space obtained by identifying Y and Z along their boundary circle. The knot complement of the (p, q)-torus knot deformation retracts to the space X. Therefore, the knot group of a torus knot has the presentation
\( \langle x,y \mid x^p = y^q\rangle. \)
Torus knots are the only knots whose knot groups have nontrivial center (which is infinite cyclic, generated by the element \( x^p = y^q in the presentation above).
Connection to complex hypersurfaces
The (p,q)−torus knots arise when considering the link of an isolated complex hypersurface singularity. One intersects the complex hypersurface with a hypersphere, centred at the isolated singular point, and with sufficiently small radius so that it does not enclose, nor encounter, any other singular points. The intersection gives a submanifold of the hypersphere.
Let p and q be coprime integers, greater than or equal to two. Consider the holomorphic function \( f: \C^2 \to \C \)given by \( f(w,z) := w^p + z^q \). Let \( V_f \subset \C^2 \) be the set of \( (w,z) \in \C^2 such that f(w,z) = 0. \) Given a real number \( 0 < \varepsilon \ll 1 \) , we define the real three-sphere \( \mathbb{S}^3_{\varepsilon} \subset \R^4 \hookrightarrow \C^2 \) as given by \( |w|^2 + |z|^2 = \varepsilon^2 \). Tne function f has an isolated critical point at \( (0,0) \in \C^2 since \partial f/\partial w = \partial f/ \partial z = 0 if and only if w = z = 0. Thus, we consider the structure of \( V_f close to (0,0) \in \C^2 \). In order to do this, we consider the intersection \( V_f \cap \mathbb{S}^3_{\varepsilon} \subset \mathbb{S}^3_{\varepsilon} \). This intersection is the so-called link of the singularity \( f(w,z) = w^p + z^q \). The link of \( f(w,z) = w^p + z^q \), where p and q are coprime, and both greater than or equal to two, is exactly the (p,q)−torus knot.[7]
See also
Alternating knot
Cinquefoil knot
Irrational cable on a torus
Prime knot
Trefoil knot
References
^ a b c Livingston, Charles (1993). Knot theory. Mathematical Association of America. ISBN 0-88385-027-3
^ a b c Murasugi, Kunio (1996). Knot theory and its applications. Birkhäuser. ISBN 3-7643-3817-2
^ a b c d Kawauchi, Akio (1996). A survey of knot theory. Birkhäuser. ISBN 3-7643-5124-1
^ a b c Lickorish, W. B. R. (1997). An introduction to knot theory. Springer. ISBN 0-387-98254-X
^ Dehornoy, P. et al. (2000). Why are braids orderable? http://www.math.unicaen.fr/~dehornoy/Books/Why/Dgr.pdf
^ Birman, J. S., and Brendle, T. E. Braids: a survey. In: Menasco, W., and Thistlethwaite, M. (Eds.) (2005). Handbook of knot theory. Elsevier. ISBN 0-444-51452-X.
^ Milnor, J. (1968), Singular Points of Complex Hypersurfaces, Princeton University Press, ISBN 0691080658
External links
Weisstein, Eric W., "Torus Knot" from MathWorld.
Torus knot renderer in Actionscript
Retrieved from "http://en.wikipedia.org/"
All text is available under the terms of the GNU Free Documentation License