Green chemistry, also called sustainable chemistry, is a philosophy of chemical research and engineering that encourages the design of products and processes that minimize the use and generation of hazardous substances.[1] Whereas environmental chemistry is the chemistry of the natural environment, and of pollutant chemicals in nature, green chemistry seeks to reduce and prevent pollution at its source. In 1990 the Pollution Prevention Act was passed in the United States. This act helped create a modus operandi for dealing with pollution in an original and innovative way. It aims to avoid problems before they happen. As a chemical philosophy, green chemistry applies to organic chemistry, inorganic chemistry, biochemistry, analytical chemistry, and even physical chemistry. While green chemistry seems to focus on industrial applications, it does apply to any chemistry choice. Click chemistry is often cited as a style of chemical synthesis that is consistent with the goals of green chemistry. The focus is on minimizing the hazard and maximizing the efficiency of any chemical choice. It is distinct from environmental chemistry which focuses on chemical phenomena in the environment. In 2005 Ryoji Noyori identified three key developments in green chemistry: use of supercritical carbon dioxide as green solvent, aqueous hydrogen peroxide for clean oxidations and the use of hydrogen in asymmetric synthesis.[2] Examples of applied green chemistry are supercritical water oxidation, on water reactions, and dry media reactions. Bioengineering is also seen as a promising technique for achieving green chemistry goals. A number of important process chemicals can be synthesized in engineered organisms, such as shikimate, a Tamiflu precursor which is fermented by Roche in bacteria. There is some debate as to whether green chemistry includes a consideration of economics, but by definition, if green chemistry is not applied, it cannot accomplish the reduction in the "use or generation of hazardous substances." Principles Paul Anastas, then of the United States Environmental Protection Agency, and John C. Warner developed 12 principles of green chemistry,[3] which help to explain what the definition means in practice. The principles cover such concepts as: * the design of processes to maximize the amount of raw material that ends up in the product; The 12 principles are: 1. It is better to prevent waste than to treat or clean up waste after it is formed. Presidential Green Chemistry Challenge Awards The Presidential Green Chemistry Challenge Awards[4] began in 1995 as an effort to recognize individuals and businesses for innovations in green chemistry. Typically five awards are given each year, one in each of five categories: Academic, Small Business, Greener Synthetic Pathways, Greener Reaction Conditions, and Designing Greener Chemicals. Nominations are accepted the prior year, and evaluated by an independent panel of chemists convened by the American Chemical Society. Through 2006, a total of 57 technologies have been recognized for the award, and over 1000 nominations have been submitted. * In 1996, Dow Chemical won the 1996 Greener Reaction Conditions award for their 100% carbon dioxide blowing agent for polystyrene foam production. Polystyrene foam is a common material used in packing and food transportation. Seven hundred million pounds are produced each year in the United States alone. Traditionally, CFC and other ozone-depleting chemicals were used in the production process of the foam sheets, presenting a serious environmental hazard. Flammable, explosive, and, in some cases toxic hydrocarbons have also been used as CFC replacements, but they present their own problems. Dow Chemical discovered that supercritical carbon dioxide works equally as well as a blowing agent, without the need for hazardous substances, allowing the polystyrene to be more easily recycled. The CO2 used in the process is reused from other industries, so the net carbon released from the process is zero. Lactide * In 2002, Cargill Dow (now NatureWorks) won the Greener Reaction Conditions Award for their improved polylactic acid polymerization process. Lactic acid is produced by fermenting corn and converted to lactide, the cyclic dimer ester of lactic acid using an efficient, tin-catalyzed cyclization. The L,L-lactide enantiomer is isolated by distillation and polymerized in the melt to make a crystallizable polymer, which has use in many applications including textiles and apparel, cutlery, and food packaging. Wal-Mart has announced that it is using/will use PLA for its produce packaging. The NatureWorks PLA process substitutes renewable materials for petroleum feedstocks, doesn't require the use of hazardous organic solvents typical in other PLA processes, and results in a high-quality polymer that is recyclable and compostable. * In 2003 Shaw Industries was recognized with the Designing Greener Chemicals Award for developing EcoWorx Carpet Tile. Historically, carpet tile backings have been manufactured using bitumen, polyvinyl chloride (PVC), or polyurethane (PU). While these backing systems have performed satisfactorily, there are several inherently negative attributes due to their feedstocks or their ability to be recycled. Shaw selected a combination of polyolefin resins as the base polymer of choice for EcoWorx due to the low toxicity of its feedstocks, superior adhesion properties, dimensional stability, and its ability to be recycled. The EcoWorx compound also had to be designed to be compatible with nylon carpet fiber. Although EcoWorx may be recovered from any fiber type, nylon-6 provides a significant advantage. Polyolefins are compatible with known nylon-6 depolymerization methods. PVC interferes with those processes. Nylon-6 chemistry is well-known and not addressed in first-generation production. From its inception, EcoWorx met all of the design criteria necessary to satisfy the needs of the marketplace from a performance, health, and environmental standpoint. Research indicated that separation of the fiber and backing through elutriation, grinding, and air separation proved to be the best way to recover the face and backing components, but an infrastructure for returning postconsumer EcoWorx to the elutriation process was necessary. Research also indicated that the postconsumer carpet tile had a positive economic value at the end of its useful life. EcoWorx is recognized by MBDC as a certified Cradle to Cradle design. Trans and cis fatty acids * In 2005, Archer Daniels Midland (ADM) and Novozymes N.A. won the Greener Synthetic Pathways Award for their enzyme interesterification process. In response to the U.S. Food and Drug Administration (FDA) mandated labeling of trans-fats on nutritional information by January 1, 2006, Novozymes and ADM worked together to develop a clean, enzymatic process for the interesterification of oils and fats by interchanging saturated and unsaturated fatty acids. The result is commercially viable products without trans-fats. In addition to the human health benefits of eliminating trans-fats, the process has reduced the use of toxic chemicals and water, prevents vast amounts of byproducts, and reduces the amount of fats and oils wasted. Glycerine to propylene glycol * In 2006, Professor Galen J. Suppes, from the University of Missouri in Columbia, Missouri, was awarded the Academic Award for his system of converting waste glycerin from biodiesel production to propylene glycol. Through the use of a copper-chromite catalyst, Professor Suppes was able to lower the required temperature of conversion while raising the efficiency of the distillation reaction. Propylene glycol produced in this way will be cheap enough to replace the more toxic ethylene glycol that is the primary ingredient in automobile antifreeze. Other awards The Royal Australian Chemical Institute (RACI) presents Australia’s Green Chemistry Challenge Awards. This awards program is similar to that of the United States Environmental Protection Agency (EPA), although the RACI has included a category for green chemistry education as well as small business and academic or government.[clarification needed] The Canadian Green Chemistry Medal is an annual award given to an individual or group for promotion and development of green chemistry in Canada and internationally. The winner is presented with a citation recognizing the achievements together with a sculpture.[5] Green Chemistry activities in Italy center around an inter-university consortium known as INCA. Beginning in 1999, the INCA has given three awards annually to industry for applications of green chemistry. The winners receive a plaque at the annual INCA meeting.[6] In Japan, The Green & Sustainable Chemistry Network(GSCN), formed in 1999, is an organization consisting of representatives from chemical manufacturers and researchers. In 2001, the organization began an awards program. GSC Awards are to be granted to individuals, groups or companies who greatly contributed to green chemistry through their research, development and their industrialization. The achievements are awarded by Ministers of related government agencies.[7] In the United Kingdom, the Crystal Faraday Partnership, a non-profit group founded in 2001, awards businesses annually for incorporation of green chemistry. The Green Chemical Technology Awards have been given by Crystal Faraday since 2004; the awards were presented by the Royal Society of Chemistry prior to that time. The award is given only to a single researcher or business, while other notable entries are given recognition as well.[8] The Nobel Prize Committee recognized the importance of green chemistry in 2005 by awarding Yves Chauvin, Robert H. Grubbs, and Richard R. Schrock the Nobel Prize for Chemistry for "the development of the metathesis method in organic synthesis." The Nobel Prize Committee states, "this represents a great step forward for 'green chemistry', reducing potentially hazardous waste through smarter production. Metathesis is an example of how important basic science has been applied for the benefit of man, society and the environment."[9] Attempts are being made not only to quantify the greenness of a chemical process but also to factor in other variables such as chemical yield, the price of reaction components, safety in handling chemicals, hardware demands, energy profile and ease of product workup and purification. In one quantitative study,[10] the reduction of nitrobenzene to aniline receives 64 points out of 100 marking it as an acceptable synthesis overall whereas a synthesis of an amide using HMDS is only described as adequate with a combined 32 points. Green chemistry is increasingly seen as a powerful tool that researchers must use to evaluate the environmental impact of nanotechnology.[11] As nanomaterials are developed, the environmental and human health impacts of both the products themselves and the processes to make them must be considered to ensure their long-term economic viability. In 2007, Europe put into place the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) program, which requires companies to provide data showing that their products are safe. The US Toxic Substances Control Act, passed in 1976, has no similar provisions. On September 29, 2008 California approved two laws which encourage green chemistry, launching the California Green Chemistry Initiative. The law requires California's Department of Toxic Substances Control to prioritize "chemicals of concern", and puts the burden of testing on the agency rather than industry. The laws were criticized by Paul Anastas, who stated that the laws did not go far enough in encouraging research, education, and industry incentives.[12] Research is currently ongoing in the area of supramolecular chemistry to develop reactions which can proceed in the solid state without the use of solvents. The cycloaddition of trans-1,2-bis(4-pyridyl)ethylene is directed by resorcinol in the solid state. This solid-state reaction proceeds in the presence of UV light in 100% yield.[13] In March 2006, the University of California published a report by Dr. Michael P. Wilson and colleagues, Daniel A. Chia and Bryan C. Ehlers, on potential chemicals policy for the California Legislature entitled, Green Chemistry in California: A Framework for Leadership in Chemicals Policy and Innovation (http://coeh.berkeley.edu/news/06_wilson_policy.htm). The report finds that long-standing weaknesses in the U.S. chemical management program, notably the Toxic Substances Control Act (TSCA) of 1976, have produced a chemicals market in the U.S. that discounts the hazardous properties of chemicals relative to their function, price, and performance. The report concludes that these market conditions represent a key barrier to the scientific, technical, and commercial success of green chemistry in the U.S., and that fundamental policy changes are needed to correct these weaknesses. Drs. Wilson and Schwarzman of UC Berkeley published their analysis in the August issue of Environmental Health Perspectives (EHP) in an article entitled, Toward a New U.S. Chemicals Policy: Rebuilding the Foundation to Advance New Science, Green Chemistry, and Environmental Health[14]. The University of Massachusetts, Boston became the first university in the World to offer a Ph.D. in Green Chemistry.[15] In 2005, the University of Oregon's chemistry department unveiled the Greener Education Materials, a database of green chemistry topics.[16] In 2009, Oxford University Press/ACS Symposium Series published Green Chemistry Education: Changing the Course of Chemistry.[17] The book contains essays from a broad array of educators who share their best practices for the incorporation of green chemistry into the chemistry and chemical engineering curricula. Several laboratory chemicals are controversial, and alternatives have been explored. The Massachusetts Institute of Technology has created the Green Alternatives Wizard to help identify alternatives. Ethidium bromide, xylene, mercury, and formalin have been identified as "worst offenders" which have alternatives.[18] Following green chemistry principles, ionic liquids and microreactors were recently used to synthesize and purify extremely reactive organometallic compounds for ALD and CVD applications, with improved safety in operations and efficient production of ultra-high purity organometallics. [19] [20] * Bioremediation - a technique that generally falls outside the scope of green chemistry References 1. ^ http://www.epa.gov/greenchemistry/ External links
Retrieved from "http://en.wikipedia.org/"
 |
|
||||||||||||